Thermon HeatChek TA 2100™ DUAL INPUT, SINGLE OUTPUT CONTROL MODULE NEW OPEN BOX

Description

Thermon HeatChek TA 2100™ DUAL INPUT, SINGLE OUTPUT CONTROL MODULE
New open box
DESCRIPTION The TA 2100 control and monitoring module, heat sink, solid state relay, door mounted alarm indicator with all points pre-wired to terminal blocks is mounted in a NEMA 4X FRP enclosure
APPLICATION The TA 2100 is a microprocessor-based temperature control and monitoring module developed specifically for heat tracing. The unit provides control and monitoring capabilities via digital information display for one heat tracing circuit with input from two RTD’s. Each RTD can provide independent sensing of the heated surface and, as a safety feature, can activate a high temperature alarm and shut down the heater. The unit can be programmed to use one RTD. RATINGS Control and monitoring capacity.......1 heat tracing circuit (up to 30 amps) Module supply voltages... 110-120, 208-240 or 277 1 Vac Controlled output voltages............................110-480 Vac Power consumption.............................................. 6 watts Operating ambient 2 ................................ -40°F to 140°F (-40°C to 60°C) Maximum storage ambient ..........................158°F (70°C) Data retention................................. nonvolatile EEPROM Power clamp function . programmable from 20% to 100% Temperature input...one or two 3-wire platinum 100 Ω RTD’s Temperature control range ....................... -40°F to 932°F (-40°C to 500°C) Control band.... programmable in increments of 1 degree Enclosure dimensions (HxWxD)..................14” x 12” x 8” (355 x 305 x 203 mm) High operating current alarm................. 1.0 to 30.0 amps Low operating current alarm.................. 0.0 to 30.0 amps (in 1 mA increments) Ground leakage alarm/trip...........................30 to 150 mA Alarm indication..............................red LED light on door Self-test frequency...... programmable from 2 to 99 hours